Setup

data cable ZV4

RS cable

flicker module and the camera (RS-connector).

Note:

It is recommended to observe the color coding

 

to ensure that the cable is as close to the camera

 

as possible.

•Connect the data cable ZV4 § between the camera (CCU-connector) and the IVS.

Without a data cable ZV4 Time-Code and Pull-Down information as well as data transfer to the IVS via the serial interface are not available.

Note:

If neither time code is used nor data is sent via

 

the serial interface, it is possible to work without

 

the data cable ZV4.

26