5.6Frame Store and Compare
The IVS can store one video image and compare it against the currently incoming images.
Note: | There is no image stored when the IVS is switched |
| on. A random image pattern is displayed when |
| the frame store is activated for the first time. |
| After pressing the key STO a real image is |
| stored and displayed. |
ON | MGC | ON | FR |
|
MGC |
|
|
|
|
| WB | STO | MODE | MODE key |
| CMP | |||
ATW |
|
|
| |
|
|
|
| |
MGC |
|
| STO | STO key |
ON | COMPOSITE |
| ||
ENTER | Y/C |
| MM |
|
INSERT |
|
| ||
|
|
|
|
Video Controls
•To store video images, activate the frame store mode by pressing the key MODE. The STO LED is illuminated indicating the store mode. By pressing the key STO it is possible to grab one video image.
The image remains stored only until another frame is stored, or until the IVS or the film camera is switched off or disconnected from the power supply.
•To activate the compare mode, press the key MODE after one image has been stored. The illuminated CMP LED indicates this mode. The stored image is superimposed on the presently incoming video image. Differences between the two images can be seen easily.
•By pressing the key MODE the IVS goes from normal mode to store mode to compare mode and back to normal mode. Every time the key STO is pressed when the IVS is in store mode, a new video frame is grabbed.
Standard
37