6.10 VITC Line Menu

For all TC- and related functions, the ARRIFLEX 535B must be equipped with the data cable ZV4 and the IVS must be in flicker free mode.

The IVS can convert time code, which can also be displayed man-readable in the video image, into machine-readable VITC (Vertical Interval Time-Code) and place it in non-visible video lines.

Note:

The time code count that is used (”filmrelated”

 

or ”videorelated time code”) depends on the

 

settings of the line ”Frame Counter” in the sub

 

menu ”Time Code” (see chapter 6.5.5).

Note:

VITC is only outputted if time code is actually

 

recorded on film. If no time code is recorded on

 

film, for example because the camera is not

 

running at a time code speed, no VITC is

 

available.

Note:

The White Line has priority over VITC lines. If

 

the same line is selected for White Line as well

 

as for VITC, White Line will appear.

SUB MENU

 

> VITC

ON

POS.1

10

POS.2

12

EXIT

T.V. SAFE / TRANSMITTED

• Enter the VITC Line Menu from the Main Menu.

All settings are immediately activated by changing them.

Check all settings on the connected monitor.

Inserter Facilities

87