4.2 Mounting the IVS on the camera
The following tools are needed to mount the IVS: | The CCD optic module is mounted on the viewfinder of | |
– 1.2 x 8 mm screwdriver or coin. | the ARRIFLEX 535B, the inserter/antiflicker module is | |
If the beam splitter is to be changed: | placed on top of the electronic cover. | |
|
| |
– Phillips screwdriver size 0 | • Be sure to use a 80 : 20 beam splitter instead an 50 : 50 | |
– Phillips screwdriver size 1 | beam splitter. Change if necessary. | |
– 1.5 mm allen key |
|
|
– Straight pair of tweezers. | Note: | Because of the high speed video optic (Academy |
|
| or Silent), it is no longer necessary to use a 50: 50 |
Disconnect camera from all power supplies. |
| beam splitter, as it was with other color video assists. |
Do not use force |
| The IVS is designed to work with an 80 : 20 |
Ensure clean contacts. |
| beam splitter. |
Support the viewfinder system.
Do not touch optical surfaces.
Setup
15