Setup
• Disconnect the RS- and the video cable.
connectors
•Take the Inserter/Antiflicker module off
•Take the CCD optic modul off.
•Close screw 1, 2, 4 and 5 on the CCD optic module mount.
•Take the viewfinder top off.
•Connect the two cables § between the viewfinder top and the base plate again.
•Close the 3 mounting screws §.
•Close the 7 mounting screws §.
•Place the viewfinder system back to the camera and mount the IVS as described in chapter 4.2.2.
3 monting screws
7 monting screws
22