Insert the CCD optic module into the video tap of the film camera with the lens first. Make sure the connector is pointing to the left side. Push the CCD optic module into the camera as far as it will go. Twist the module a little left and right until the key of the lens gear finds its path and insert the module further into the camera. Tighten the screw ring a little but do not close it entirely.

Place the Inserter/Antiflicker module on the film camera and connect it to the CCD optic module. Insert the attachment screw § into the camera handle without closing it and push the Inserter/Antiflicker module as far to the right as possible. Close the attachment screw on the camera handle.

Secure the CCD optic module by closing the screw ring § clockwise.

Connect the RS-cable § between the inserter/anti-

attachment screw

connector

screw ring

Setup

25