Setup
S2 | • Make sure that the focus screw (S3) § and the |
S3 | alignment screws (S1, S2 and S4) § are in the |
| middle of their range. |
F | • Place the cover back on the CCD optic module. |
• Take the video lens out of the CCD optic module by | |
| turning the front ring of the lens |
| loose and pull the lens forwards to remove. |
• Insert the respective video lens with the thread first into
S1 S4the CCD optic module as far as it will go §. Turn the lens left or right to insert the iris key into its path and push the lens further in.
Close the thread clockwise until the lens is secured.
The video lens must be properly inserted into the lens mount until the end of the thread. Uncomplete insertion might result in damage to the beam splitter when attaching the unit to the camera body.
24