ARRI WRC-2 instruction manual Wired Configurations, Direct connection via the Camera Connector

Setup

5.10 Wired Configurations

The WRC-2 can be wired to a camera or to a Universal Motor Controller UMC-3 in three different ways:

5.11Direct connection via the Camera Connector

to ARRICAM Studio and Lite: KC-125

to ARRIFLEX 235, 416, 435, 535, SR3 (HS): KC-39(1,5m/5ft) or KC-41(20m/60ft):

5.12Connection via the Wireless Handgrip Attachment WHA-2 or WHA-3

To connect the WRC-2 to the LCS Bus the Wirless Handgrip Attachment WHA-2 or WHA-3 has to be mounted on the back of the WRC-2.

*LCS Bus = Lens Control System interface. ARRI Cameras and accessories can be connected. The bus can be recognized by the red sockets and red plugs. See next page for a list of LCS cables.

Camera Connector

KC-125

KC-39 or KC-41

LCS Cable

16