14.6 Ramp Options
In the Ramp Options Menu the Exposure Calculation and Iris Control can be enabled. Also the Ramp Direction can be changed and ramps can be saved and loaded.
●In the Ramp Menu click on „Options“ to enter the
Ramp Options Menu.
Change Ramp Direction:
●Click on „Change Ramp Direction“ in the Ramp Window and confirm the safety message.
Set to Default
●Will reset all ramp parameters to a standard speed ramp to provide a basic setting.
Safe and Load a Ramp
Save a Ramp
●Click on „Save Ramp as“ to save the actual Ramp. Note the name of the folder.
Load a Ramp
●Click on „Load Ramp“ and navigate to the folder where the Ramps are saved.
Ramp Control Menu
Ramp Options Menu
Ramp Control Menu
47
