ARRI WRC-2 instruction manual Name the Iris Table

Step 4

Define the T-Stop positions

● Make sure the iris is set to the T‑Stop marked by the yellow arrow (e.g. f1.9). Use the knob of the WRC-2 to adjust the position. Alternatively you can use the slider on the bottom of the screen.

● Click „Set“ to assign the postions to the iris.

● Go ahead like this until all T‑Stops are assigned. If necessary, click on „Back“ or „Next“ to reassign the positions.

● Set at least five T-Stops. When the yellow arrow is at the last position, click next to finish the process.

Step 5

Name the Iris Table

● Enter an appropriate name for the iris table including lens type, focal lenght and some last digits of the serial number.

(e.g. „UP_50mm_1234) ● Click „Finish“

● To activate the Iris Table, go to the Lens Manager Menu and load the Iris Table (see Chapter 13)

Lens Manager Menu

39