ARRI WRC-2 General Operation and Navigation, Touchscreen Navigation, Key Navigation, Lock/Unlock

7. General Operation and Navigation

The operating software can be controlled in two ways.

7.1 Touchscreen Navigation

1.) Direct control via the „Touch screen“. Simply click on the icons, sliders or other menu buttons with the on-board Stylus or your finger. To release the Stylus, press the „Stylus Release Button“ on the right side of the WRC–2.

7.2 Key Navigation

2.) Navigate through the menus with the „Arrow Buttons“ and use the „Function Keys“ to activate the buttons copied in the software. For example: Instead of clicking on the „Edit“ button on the Touch Screen, just press the left „Function Key“.

Use the left and right Arrow Buttons to jump from item to item, use the up and down Arrow Buttons to change values or to operate sliders.

Lock/Unlock

To lock/unlock the keypad, press the Lock/ Unlock Key for three seconds.

Camera Connector

Touchscreen

Function Key

Arrow Button

Run Button

Knob

Marking Disk

PC and USB sockets Stylus (Pen)

Stylus Release

Button

Function Key

Lock/Unlock Key

Ramp Button

Introduction

21