Status Window, LDS e.g mm T1.9, Iris | ARRI WRC-2 specification

12.2 Status Window

On the right side of the screen, the actual camera status is displayed. The color of the screen can alter:

cyan	= standby
green	= camera running
orange = inching
red	= warning or not ready

The following values and settings are displayed:

Battery Voltage

Displays the Voltage value.

PS/CCU

Displays the camera setting PS/CCU or NORM. In order to be able to change the speed settings, the camera has to be set to PS/CCU.

When the camera is switched to NORM mode, all other options are available (shutter, iris etc.).

LDS: e.g. 40mm T1.9

In this case, a 40mm LDS Ultra Prime is connected to the camera. The widest f-stop is T1.9

Note: This f-stop value is not the actual f-stop, set on the lens.

Message & Warnings Field

Error Messages will be displayed here.

Iris

The Iris value, that is actually set on the lens.

Camera Control Menu

27

Image 27

ARRI WRC-2 Status Window, Following values and settings are displayed Battery Voltage, LDS e.g mm T1.9, Iris

Contents

WRC-2 Page Order Numbers Contents Change Ramp Direction General Safety Instructions Safety Instructions Specific safety instructions Disclaimer Disclaimer Introduction Introduction Setup TransmittingReceiving Mounting the WRC-2 on the WMU-3 or WMU-2 WRC-2 & Arriflex 435 Xtreme / Advanced WRC-2 & Arricam Studio and Lite WRC-2 & other Arri Cameras WRC-2 & Arriflex Direct connection via the Camera Connector Wired Configurations LCS Cables Connection via Universal Remote Controller URM-3 WRC-2 & Arriflex 435 Xtreme / Advanced Possible Connections WRC-2 & Arricam Studio and Lite Possible Connections WRC-2 & Arriflex 416 Possible Connections Powering Up The Unit Using the StylusIntroduction First Steps Lock/Unlock General Operation and NavigationTouchscreen Navigation Key Navigation Functions „Exit and „Edit Buttons Menu Structure Starting a Software Module Main Menu Camera Control Menu WRC-2 Settings Menu Settings Window Status Window Message & Warnings Field Following values and settings are displayed Battery VoltageStatus Window LDS e.g mm T1.9 Choose from a preset camera speed Camera Control Menu Changing Camera SpeedEnter a user defined camera speed Add a user defined speed value Editing Preset Speeds & Change Camera DirectionDelete items from the preset list Add all default speed values Choose from a preset camera shutter angle Changing Camera Mirror ShutterEdit a specific camera shutter angle Editing Preset Camera Shutter Angles Add all default camera shutter valuesAdd a user defined shutter angle value Camera Control Menu Filmcounter Sub-Menu Camera Control Options Sub-Menu TCS Time Code Sensitivity Camera Control Menu Time Code Sub-MenuTo enter the Time Code Sub-Menu Time Code on/off Time / User Bits Lens Manager Menu Functions Using a Lens with Lens Data SystemUsing a Lens without LDS Lens Manager Menu Add Iris Tables from the User Folder System Administer Iris Tables Create new Iris TablesLoad Iris Tables Remove Iris Tables from the User Iris List Step MenuLens Manager Creating new Iris Tables with the Iris Table Wizard Name the Iris Table Intentionally left blank Ramp Control Menu Ramp Control Menu Enabling the Iris Control Programming a Ramp Mixed Compensation via Shutter and Iris Ramp Control Menu Exposure CompensationCompensation via the Mirror Shutter Compensation via the iris To Enable the Exposure Calculation Exposure CalculationUse the Exposure Calculation Ramp Control Menu Compensation Free Style Enable „Compensation Free Style Safe and Load a Ramp Save a Ramp Set to DefaultRamp Options Change Ramp Direction Ramp Control Menu Ramp Example External Display Menu Updating the WRC-2 Appendix File Dialog Service Menu Exit from AppAdjusting the Knob Handwheel Cleaning Cleaning the Touchscreen Appendix Troubleshooting Communication ProblemsNo Speed setting available Intentionally left blank Operating Temperature Range Technical Data DimensionsWeight Power Supply Arri Service Index Index Page Index