15. External Display Menu

The External Display Menu remote controls the camera menu and shows the same information as screened on the camera display.

Note: The External Display Menu can only be used with cameras provided with an LCD display.

(e.g. ARRIFLEX 435, 535, 16SR-3, 416).

Thus the External Display Menu can neither be used with ARRICAM Studio or ARRICAM Lite, nor with older ARRIFLEX cameras without an LCD display (e.g. SR-2, SR-1, BL-4 etc.)

In the Main Menu click on the ikon „External Display“ to open the Menu.

Click on „Mode“ to navigate to the next mode.

To change a value: Click on „SEL“ until the desired value starts to flash.

Click „Set“ to change the value.

Wait until the value stops flashing or click „Mode“ to confirm the new setting.

Main Menu

External Display

External Display Menu

49

Page 49
Image 49
ARRI WRC-2 instruction manual External Display Menu