Appendix

16.4 Troubleshooting

Communication Problems:

In the event of a communication failure between the WRC-2 and the LCS Device or the Camera, the EDIT button will turn red and a dot will run across the text.

To solve the problem, check all cable connections and restart the unit.

When using the WRC-2 wireless via a WMU-3 or WMU‑2, try the following:

1.) Connect both units, receiver (e.g. Lens Data Box) and transmitter (e.g. WMU-3) via the WC–A3 antenna cable to eliminate possible transmitting errors.

2.) Select a different channel on transmitter and receiver and restart the camera.

Wait for a flashing green RF signal on the LCS unit (FEM- 2, LDB, UMC-3 etc) and then restart the WMU‑3.

No Speed setting available:

Check if the camera is set to „PS/CCU“ and not to „NORM“.

52

Page 52
Image 52
ARRI WRC-2 instruction manual Appendix Troubleshooting, Communication Problems, No Speed setting available