Manuals / Asante Technologies / Computer Equipment / Switch

Asante Technologies 1000 user manual Menus

Models: 1000

1 88

Download 88 pages 37.15 Kb

Page 57

6

Menus

This chapter describes each management menu on the SuperStack II Switch 1000 Personality Module’s Device Page.

The table below provides a brief description of each menu; the sections that follow explain each menu in detail.

	Table 6-1 Device Page Menu Descriptions

Menu	Description

Conﬁguration	Title for the submenus listed below it; this menu cannot be
	selected.

VLAN	Allows you to name, disable or enable any of the 16 groups
	of VLAN. See “VLAN” on page 6-3.

AddressList	Allows you to view the last 500 addresses that the device
	received. Also allows you to restrict access to each port.
	See “Address List” on page 6-4.

Identify	Allows you to conﬁgure device identiﬁcation information.
	See “Identify” on page 6-6.

Device	Allows you to view general device information. See
	“Device” on page 6-7.

Agent	Allows you to view information on the device’s SNMP
	agent. See “Agent” on page 6-8.

Slots	Allows you to view and conﬁgure the device’s group infor-
	mation. See “Slots” on page 6-9.

Setup	Title for the submenus listed below it; this menu cannot be
	selected.

Upgrade	Allows you to determine the download ﬁle name and server
	address for upgrading the device’s software. See
	“Upgrade” on page 6-13.

Page 6-1

Image 57

Asante Technologies 1000 user manual Menus

Contents

IntraSpection Personality Module 3Com SuperStack II SwitchUser’s Manual Asanté Technologies, Inc 821 Fox Lane San Jose, CA 1.800.662.9686Copyright Notice Installation Table of ContentsAccessing the Device PrefaceVLAN ManagementIndex MenusIndex-i Technical SupportPage Chapter Contents PrefaceAbout This Manual Audience Document ConventionsSuperStack II Switch 1000 Personality Module IntroductionIntraSpection Personality Modules Management Options System Requirements ClientServer Page Installing a Personality Module Installation8 Click Next to continue 13 Click OK The “IntraSpection Module Installation” window appears Page Accessing the Device Page Accessing the Device5 Click Apply Device Information Device Page ComponentsFront Panel Image VLAN Identiﬁcation WindowSelecting a VLAN Group for Management Selecting the Device for ManagementAccessing the Device Selecting a Port for ManagementTo select a port for management To deselect the port Click again on the selected portTables MenusTable Columns ButtonsPage Performing Basic Management Functions ManagementConﬁguration Tasks Management TasksManagement Important For information on using VLAN, see Chap- ter 5,“VLAN.”Page Management TaskSetting Community Strings The Map Conﬁguration Table appears, similar to Figure 3 Click the Edit Device button7 Click Apply The read and write community strings are conﬁgured ManagementClick netwAccess Conﬁguring Network Access ParametersClick Identify Conﬁguring Identiﬁcation InformationPerforming a Software Upgrade Click Validate Updating the Device PageViewing General Device Information Figure 4-8 Slot Conﬁguration Table Resetting the DeviceViewing Group Information Viewing Group InformationManaging Trap Receivers Adding a Trap ReceiverClick trapReceivers Modifying a Trap Receiver Deleting a Trap ReceiverFigure 4-11 Agent Information table Viewing SNMP Agent InformationManaging the Port Address Table Viewing the Port Address Table2 Click Address List Page To manually delete an entry in the Port Address Table Deleting an EntryClick Modify Open the Address Status drop-down menu and select delete 4 Click Apply The entry is deletedTable Statistics Viewing StatisticsStatistics are gathered in the following columns Figure 4-14 Graph Statistics Graph StatisticsVLAN Overview VLANViewing VLAN Groups VLAN Ports VLAN GroupsFigure 5-4 VLAN menus VLAN Menu ItemsCreating VLAN Groups Figure 5-6 Assigning a port to a VLAN group Figure 5-5 Selecting a port buttonPort Button Selection drag the button to the VLAN group drop the button on the VLAN groupVLAN Groups 7 Repeat steps 1 - 6 for each port you want to assign to a VLAN groupFigure 5-7 New VLAN group Pagevia the VLANView Page Managing VLAN GroupsNaming a VLAN Group 5 Click Modify The Modify Dialog box appears 4 Select the VLAN group to be named by clicking once on its row entry6 Type a name for the VLAN group in the WGroup- Name ﬁeld 7 Click ApplyDisabling a VLAN Group Viewing Statistics for a VLAN Group Menus Page MenusVLAN Address List Address List PageIdentify Device Agent Slots Page Menus6-port ﬁber, SMA connector expandable SlotsPage Page MenusUpgrade Network Access Trap Receivers Page MenusValidate ValidateGraph Page GraphPage MenusTable 6-12 describes each ﬁeld in the Table menu Δ Note For instructions on using this menu, see Chapter 5, “VLAN.” VLAN ViewTable 6-13 describes each ﬁeld in the VLAN View menu MenusPage VLAN ViewPage Technical Support Contacting Asanté Technical SupportTechnical Support Hours Page Index Index-ii Index-iii Index-iv Windows NT continued write community string, configuringstarting server 2-3 World Wide Web browsers supported Index-v