Asante Technologies 1000 Field Description WGroupIndex, WGroupName, UnitID, DownLinkPortID

VLAN

VLAN

This menu allows you to name, disable or enable any of the SuperStack II Switch 1000’s 16 groups of VLAN.

Table 6-2 describes each field in the VLAN menu.

ΔNote: For instructions on using this menu, see“Naming a VLAN Group” on page 5-9,“Disabling a VLAN Group” on page 5-11, or “Viewing Statistics for a VLAN Group” on page 5-12.

	Table 6-2 VLAN Menu
Field	Description
WGroupIndex	(Workgroup Index) Read-only field; displays the num-
	ber of the VLAN group (from 1001 to 1016).
WGroupName	Configurable field; determines a name for the VLAN
	group.
	See “Naming a VLAN Group” on page 5-9 for instruc-
	tions.
UnitID	Read-only field; displays the identity of the unit on
	which the VLAN group’s downlink resides.
DownLinkPortID	Read-only field; displays the identity of the downlink
	port for the VLAN group.
Status	Configurable field; enables or disables the group of
	VLAN.
	See “Disabling a VLAN Group” on page 5-11 for
	instructions.
	❏ active — enables the group of VLAN.
	Note: Refer to the SuperStack II Switch 1000’s MIB
	(Management Information Base) for more information
	on the options available in this field.
DBaseAction	Configurable field; allows you to carry out operations
	on the VLAN group’s address list in the forwarding
	database.
	❏ FreezeAddrs — makes all addresses in the
	workgroup permanent.

Page 6-3