Manuals / Asante Technologies / Computer Equipment / Switch

Asante Technologies 1000 user manual 13 describes each ﬁeld in the VLAN View menu, Menus, Page

Models: 1000

1 88

Download 88 pages 37.15 Kb

Page 78

Menus

VLAN View

This menu allows you to view, conﬁgure, and manage the 16 groups of VLAN that are supported by the SuperStack II Switch 1000.

Table 6-13 describes each ﬁeld in the VLAN View menu.

ΔNote: For instructions on using this menu, see Chapter 5, “VLAN.”

	Table 6-13 VLAN View Menu

Field	Description

Group Number/	Buttons; represent each of the device’s ports.
Port Number

Vlan1 – Vlan 16	Buttons; represent each of the device’s 16 groups of
	VLAN.

Menu Items	Menus; allow you to manage each conﬁgured group
	of VLAN (groups that contain at least one port) or the
	entire device. These menus are identical to those on
	the Device Page.
	❏ Conﬁguration
	❏ VLAN — allows you to name, disable or
	enable the selected VLAN group. See
	“VLAN” on page 6-3.
	❏ Address List — allows you to view the
	last 500 IP addresses that the device
	received and allows you to restrict access
	to each port. See “Address List” on page
	6-4.
	❏ Identify — allows you to conﬁgure identi-
	ﬁcation information for the device. See
	“Identify” on page 6-6.
	❏ Device — allows you to view general
	information on the device. See “Device”
	on page 6-7.
	❏ Agent — allows you to view SNMP agent
	information on the device. See “Agent”
	on page 6-8.
	❏ Slots — allows you to view and conﬁgure
	the device’s group information. See
	“Slots” on page 6-9.

Page 6-22

Image 78

Asante Technologies 1000 user manual 13 describes each ﬁeld in the VLAN View menu, Menus, Page

Contents

User’s Manual 3Com SuperStack II SwitchIntraSpection Personality Module Asanté Technologies, Inc 821 Fox Lane San Jose, CA 1.800.662.9686Copyright Notice Accessing the Device Table of ContentsInstallation PrefaceManagement VLANIndex-i MenusIndex Technical SupportPage Chapter Contents PrefaceAbout This Manual Document Conventions AudienceSuperStack II Switch 1000 Personality Module IntroductionIntraSpection Personality Modules Management Options System Requirements ClientServer Page Installation Installing a Personality Module8 Click Next to continue 13 Click OK The “IntraSpection Module Installation” window appears Page Accessing the Device Accessing the Device Page5 Click Apply Device Page Components Device InformationVLAN Identiﬁcation Window Front Panel ImageSelecting the Device for Management Selecting a VLAN Group for ManagementTo select a port for management Selecting a Port for ManagementAccessing the Device To deselect the port Click again on the selected portTable Columns MenusTables ButtonsPage Conﬁguration Tasks ManagementPerforming Basic Management Functions Management TasksPage Important For information on using VLAN, see Chap- ter 5,“VLAN.”Management Management TaskSetting Community Strings 7 Click Apply The read and write community strings are conﬁgured 3 Click the Edit Device buttonThe Map Conﬁguration Table appears, similar to Figure ManagementConﬁguring Network Access Parameters Click netwAccessConﬁguring Identiﬁcation Information Click IdentifyPerforming a Software Upgrade Updating the Device Page Click ValidateViewing General Device Information Resetting the Device Figure 4-8 Slot Conﬁguration TableViewing Group Information Viewing Group InformationManaging Trap Receivers Adding a Trap ReceiverClick trapReceivers Deleting a Trap Receiver Modifying a Trap ReceiverViewing SNMP Agent Information Figure 4-11 Agent Information tableManaging the Port Address Table Viewing the Port Address Table2 Click Address List Page Click Modify Open the Address Status drop-down menu and select delete Deleting an EntryTo manually delete an entry in the Port Address Table 4 Click Apply The entry is deletedViewing Statistics Table StatisticsStatistics are gathered in the following columns Graph Statistics Figure 4-14 Graph StatisticsVLAN VLAN OverviewViewing VLAN Groups VLAN Groups VLAN PortsVLAN Menu Items Figure 5-4 VLAN menusCreating VLAN Groups Port Button Selection Figure 5-5 Selecting a port buttonFigure 5-6 Assigning a port to a VLAN group drag the button to the VLAN group drop the button on the VLAN groupFigure 5-7 New VLAN group 7 Repeat steps 1 - 6 for each port you want to assign to a VLAN groupVLAN Groups PageManaging VLAN Groups via the VLANView PageNaming a VLAN Group 6 Type a name for the VLAN group in the WGroup- Name ﬁeld 4 Select the VLAN group to be named by clicking once on its row entry5 Click Modify The Modify Dialog box appears 7 Click ApplyDisabling a VLAN Group Viewing Statistics for a VLAN Group Menus Menus PageVLAN Address List Page Address ListIdentify Device Agent Slots Menus Page6-port ﬁber, SMA connector expandable SlotsPage Menus PageUpgrade Network Access Trap Receivers Menus PageValidate ValidateGraph Graph PageMenus PageTable 6-12 describes each ﬁeld in the Table menu Table 6-13 describes each ﬁeld in the VLAN View menu VLAN ViewΔ Note For instructions on using this menu, see Chapter 5, “VLAN.” MenusVLAN View PagePage Technical Support Contacting Asanté Technical SupportTechnical Support Hours Page Index Index-ii Index-iii Index-iv starting server 2-3 World Wide Web browsers supported write community string, configuringWindows NT continued Index-v