Asante Technologies 1000 Field Description SwVersion, Serviceid, EntityName, PowerReq, LampTest

Menus

Field	Description
SwVersion	Read-only field; displays the software version number
	of the entity at this location if the entity contains a
	processor. If an entity has no software, the value of
	this parameter is “none.”
Serviceid	Read-only field; displays the number of the service in
	the device. This ID can be used to reference the ser-
	vice elsewhere in the MIB.
EntityName	Read-only field; displays the name of the entity at this
	location.
PowerReq	Read-only field; displays the power consumption
	requirement of the entity.
NumberofPorts	Read-only field; displays the number of ports on the
	entity at this location.
LampTest	Configurable field; displays the status of the test that
	can be performed on entities contained in the rack.
EntityState	Read-only field; displays the state of the entity in the
	stack.
	Each entity in the stack/chassis has a basic state inde-
	pendent of what function that entity performs within
	the stack/chassis (initializing, operational, failure). If
	the agent cannot determine the state of a particular
	entity, the value is unknown.
Action	Configurable field; resets the specified unitcard.
POSTtype	Configurable field; displays the type of power-on self
	tests which an entity carries out during power-up.
	❏ normalPOST — a basic confidence check of
	the entity (5 seconds) is performed.
	❏ extendedPOST — a comprehensive set of
	tests (3 minutes) are performed.
PlugInType	Read-only field; displays the type of plug-in module (if
	any) attached to this entity.
	If a plug-in module can never be attached to this
	entity, the value notApplicable is displayed.

Page 6-12