
PC Health Status
The following screen shows the PC Health Status parameters and their default settings:
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
CPU Warning Temperature | [70°C/150°F] | Item Help | ||
CPU Shutdown Temperature | [90°C/194°C] | |||
| ||||
SYS Shutdown Temperature | [70°C/150°F] | Menu Level X | ||
CPU Core Voltage | 1.28V |
|
| |
DIMM Voltage | 1.77V |
|
| |
+3.3V | 11.84V |
|
| |
+5.0V | 4.91V |
|
| |
+12V | 11.96V |
|
| |
CPU Temperature | 21°C |
|
| |
SYS Temperature | 36°C |
|
| |
CPU Fan Speed | 881 RPM |
|
| |
SYS Fan Speed | 919 RPM |
|
| |
Smart FAN Control | [Enabled] |
|
| |
KLIJ :Move Enter: Select | F10: Save and Exit ESC:Exit | |||
F1: General Help F5: Previous Values | F7: Optimized Defaults |
The following table describes the parameters found in this menu:
Parameter | Description | Options |
|
|
|
CPU Warning | This item lets you select the temperature at which | Disabled |
Temperature | you want the system to send out a warning |
|
| message to the PC speakers of when the |
|
| temperature goes beyond either limit. |
|
|
|
|
CPU Shutdown Temp. | This option is for setting the shutdown temperature level for the processor. When | |
| the processor reaches the temperature you set, the system will be shut down. | |
|
| |
SYS Shutdown Temp. | This option is for setting the shutdown temperature level for the system. When the | |
| system reaches the temperature you set, the | |
|
| |
CPU Core Voltage to | These items in light blue show various current system voltage, temperature, and | |
SYS Fan Speed | speed measurements. These items are read only and cannot be altered. | |
|
|
|
Smart FAN Control | Enable smart fan control function. | Enabled |
| Disabled | |
| degrees Celsius, CPU fan will run at full speed. |
|
|
| |
| depend on the temperature if the temperature is |
|
| more than 41 degree and less than 65 degree. |
|
|
| |
| degrees Celsius, CPU fan will be disable. |
|
|
|
|
Chapter 2 | 37 |