Entering Setup
Power on the computer and the system will start POST (Power On Self Test) process. When the message of “Press DEL to enter SETUP” appears on the screen, press the key of [Delete] to enter the setup menu.
NOTE: If the message disappears before you respond and you still wish to enter Setup, restart the system by turning it OFF and On. You may also restart the system by simultaneously pressing [Ctrl+Alt+Delete].
The Setup Utility main menu then appears:
Phoenix - AwardBIOS CMOS Setup Utility
XProduct Information | XPC Health Status |
XStandard CMOS Features | XFrequency/Voltage Control |
XAdvanced BIOS Features | Load Optimized Defaults |
XAdvanced Chipset Features | Set Supervisor Password |
XIntegrated Peripherals | Set User Password |
XPower Management Setup | Save & Exit Setup |
XPnP/PCI Configuration | Exit Without Saving |
Esc: Quit | KLIJ : Select Item |
F10: Save & Exit Setup |
|
| Change/Set/Disable Password |
V02.54 (C) Copyright
The command line at the bottom of the menu tells you how to move within a screen and from one screen to another.
•To select an option, move the highlight bar by pressing 
or 
then press 
.
•To change a parameter setting, press 
or 
until the desired setting is found.
•Press 
to return to the main menu. If you are already in the main menu, press 
again to exit Setup.
The parameters on the screens show default values. These values may not be the same as those in your system.
The grayed items on the screens have fixed settings and are not
NOTE: Due to the application of a new version of BIOS Setup program, you may find the BIOS menu is largely
different from the former models. However, you will soon find out that this version is much more compact than the former ones.
16 | Chapter 2 |
