Reassembly Procedure

Aspire M1610/Veriton M261 Reassembly

NOTE: The only physical difference between the two models is the front bezel as shown in the procedures.

1.Install the Power-supply by fitting the Power-supply into the chassis, then fasten the four screws shown.

2.Install the mainboard by aligning the I/O connector with the chassis, making sure the M/B VIA hole fits the oriented STAND OFF on the chassis. Insert the 6 screws to hold the M/B in place as shown.

3.Install the CPU.

52

Chapter 3

Page 60
Image 60
Aspire Digital manual Reassembly Procedure, Aspire M1610/Veriton M261 Reassembly