5.4.3JMicron® RAID Configuration
The JMicron® Serial ATA controller allows you to configure RAID 0, RAID 1 and JBOD sets on the external Serial ATA hard disk drives.
Before creating a RAID set
Prepare the following items:
1.Two SATA HDDs, preferably with the same model and capacity.
2.A
3.Microsoft® Windows® OS installation disk (Windows 2000/XP)
4.Motherboard support CD with JMB363 driver
Complete the following steps before you create a RAID set:
1.Install the external Serial ATA hard disk drives (HDDs) on your system.
2.Set the JMicron Controller Mode item in the BIOS to [RAID]. See section
“4.4.6 Onboard Devices Configuration” for details.
BIOS SETUP UTILITY
|
| Advanced |
|
|
|
|
|
| Configure Win627EHF Super IO Chipset |
|
| Enable or Disable | |||
| HD Audio Controller | [Enabled] | High | Definition Audio | |||
| Controller | ||||||
| Front Panel Support Type | [AC97] |
|
| |||
| Onboard 1394 Controller | [Enabled] |
|
| |||
| Onboard PCIE GbE LAN_1 | [Enabled] |
|
| |||
| LAN Option ROM | [Disabled] |
|
| |||
| Onboard PCI LAN_2 | [Enabled] |
|
| |||
| LAN Option ROM | [Disabled] |
|
| |||
| JMicron SATA/PATA Controller | [Enabled] |
|
| |||
| JMicron Controller Mode | [RAID] |
|
|
| ||
|
|
|
|
|
|
| Select Screen |
| Serial Port1 Address | [3F8/IRQ4] |
| Select Item | |||
| +- | Change Option | |||||
|
|
|
|
|
| ||
|
|
|
|
|
| F1 | General Help |
|
|
|
|
|
| F10 | Save and Exit |
|
|
|
|
|
| ESC | Exit |
v02.58 (C)Copyright
3.Enter the JMB363 RAID BIOS utility to set up your RAID configuration.
4.Create a JMB363 RAID driver disk for Windows® OS installation. See section “5.5 Creating a RAID driver disk” for details.
5.Install the JMB363 driver after the Windows® OS had been installed.
Chapter 5: Software support |
