2-30 Chapter 2: Hardware information
5. USB connectors WiFi-AP Edition: (10-1 pin USB56, USB78) Standard Edition: (10-1 pin USB56, USB 78, USB910)These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specication that supports up to 480 Mbps connection speed.Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
6. IEEE 1394a port connector (10-1 pin IE1394_2)This connector is for a IEEE 1394a port. Connect the IEEE 1394a module cable to this connector, then install the module to a slot opening at the back of the system chassis.P5B Deluxe
®
P5B Deluxe IEEE 1394a connector
IE1394�2 1
GND
+12V
TPB1-
GND
TPA1-
+12V
TPB1+
GND
TPA1+
P5B Deluxe
®
P5B Deluxe USB 2.0 connectors
USB56
USB+5V
USB�P6-
USB�P6+
GND
NC
USB+5V
USB�P5-
USB�P5+
GND
1
USB78
USB+5V
USB�P8-
USB�P8+
GND
NC
USB+5V
USB�P7-
USB�P7+
GND
1
USB910
NCGNDUSB�P10+USB�P10-USB+5VGNDUSB�P9+USB�P9-USB+5V1