
8.Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a
By default , the pin labeled “Chassis Signal” and “ Ground” are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature.
P5B Deluxe | MB | Signal |
| +5VSB� | Chassis GND |
| CHASSIS | (Default) |
|
|
P5B Deluxe Chassis intrusion connector
9.ATX power connectors
(24-pin EATXPWR, 2x4-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
|
| DC DC DC DC |
| EATXPWR | |
Deluxe |
| +12V +12V +12V +12V |
| ||
EATX12V | +3 Volts | Ground | |||
P5B |
|
| +12 | Volts | +5 Volts |
|
|
| |||
|
|
| +12 | Volts | +5 Volts |
|
| GND GND GND GND | +5V Standby | +5 Volts | |
|
| Power OK | |||
|
| Ground | Ground | ||
|
|
| +5 | Volts | Ground |
|
|
| Ground | Ground | |
|
|
| +5 Volts | PSON# | |
P5B Deluxe ATX power connectors | Ground | Ground | |||
+3 Volts | |||||
|
|
| +3 | Volts | +3 Volts |
•Make sure to remove the cap on the EATX12V connector before connecting an
•Use only either a
Chapter 2: Hardware information |