ATTO Technology 2100R ATTO FC Rack Enclosure and Power Modules, Physical Dimensions, Mounting

ATTO Technology, Inc. ATTO FibreBridge Installation & Operation Manual

Chapter 3: ATTO FC Rack Enclosure and Power Modules

This chapter provides an overview of the ATTO FC Rack System and the Power Modules, as well the installation process for the Power Modules. The main enclosure of the ATTO FC Rack System houses all the FibreBridge™ Product Modules and Power Modules. There are two bays for FibreBridge Product Modules and two bays for Power Modules.

Physical Dimensions

Figure 3.1 Rear view with dual redundant power supplies

The physical dimensions of the ATTO FC Rack System are 17.4" W x 17"D x 1.72"H

(441.6mm W x 431.5mm D x 43.7mm H)

Mounting

The ATTO FC Rack System can be installed with the ATTO Product Modules facing the front or the back because the "L"-brackets can be installed on either end. The mounting holes on the "L"-bracket fit a standard 19” rack, using a centered 1.25” (31.7mm) hole pattern.

1.25”

(31.7mm)

1.72”

(43.6mm)

Figure 3.2 "L" Mounting Bracket

ATTO Technology, Inc.

- 5 -