ATTO Technology 2100R manual Fibrebridge Services, Setting up the IP Address using the RS-232 port

ATTO Technology, Inc.	ATTO FibreBridge Installation & Operation Manual
SCSI TERMINATION		21
FIBRE CHANNEL CABLING		22
GBICS		22
GBIC MODULE AND GBIC GUIDE SYSTEM		23
GBIC INSTALLATION INSTRUCTIONS		23
GBIC REMOVAL INSTRUCTIONS		24
MEDIA INTERFACE ADAPTERS (MIA)		24
MIA INSTALLATION		25
CHAPTER 7: FIBREBRIDGE SERVICES		26
MONITORING AND MANAGING THE ATTO FIBREBRIDGE		26
ATTO BRIDGETOOLS GRAPHICAL INTERFACE CONFIGURATION PROGRAM		26
ACCESSING THE ATTO FIBREBRIDGE OVER THE RS-232 INTERFACE		26
ACCESSING THE ATTO FIBREBRIDGE OVER THE ETHERNET PORT		27
Setting up the IP Address using the RS-232 port		27
Accessing the ATTO FibreBridge using a Telnet session over Ethernet		28
Accessing through FTP		28
CHAPTER 8: SERVERLESS BACKUP SUPPORT		30
WHAT IS SERVERLESS BACKUP ?		30
TARGET DESCRIPTORS		31
SEGMENT DESCRIPTORS		31
GENERAL OPERATION OF SERVERLESS BACKUP		31
ENABLING SERVERLESS BACKUP ON THE FIBREBRIDGE		31
CHAPTER 9: UPDATING THE FIRMWARE WITHIN THE FIBREBRIDGE		32
FLASHING THE FIBREBRIDGE		32
CHAPTER 10: ADDRESSING SCSI DEVICES		33
IDENTIFYING THE FIBREBRIDGE		33
IDENTIFYING THE SCSI DEVICES CONNECTED TO THE FIBRE BRIDGE		34
DEFAULT ADDRESS TRANSLATION		35
APPENDIX A: FIBRE CHANNEL TO SCSI ADDRESS MAPPING		36
FIBRE CHANNEL WORLD WIDE NAME (WWN)		37
ARBITRATED LOOP PORT ADDRESS (AL_PA)		37
SCSI BUS IDENTIFIER		37
SCSI TARGET IDENTIFIER		38
SCSI LOGICAL UNIT NUMBER		38
WHAT IS A LOGICAL UNIT ?		38
HIERARCHICAL ADDRESSING MODEL		38
ADDRESSING FIELD FORMAT		38
PERIPHERAL DEVICE ADDRESSING METHOD		39
VIRTUAL DEVICE ADDRESSING METHOD		40
LOGICAL UNIT ADDRESSING METHOD		40
FIBREBRIDGE DEFAULT MODE		40
ADDRESS DESCRIPTORS		41
SCSI-3 INQUIRY COMMAND		41
SCSI-3 REPORT LUNS COMMAND		42
SETTING THE ID OF THE FIBREBRIDGE		42
ADDRESSING CONNECTED SCSI DEVICES		42
CONFIGURATION FOR CONSECUTIVE IDS		44
CONFIGURATIONS FOR RAID CONTROLLERS		44

ATTO Technology, Inc.

- iii -