Establishing security
192 Avaya VPNmanager Configuration Guide Release 3.7
4. From the drop-down list, select Packet Filtering, then click GO to open the Policy Manager
for Packet Filtering.
5. Click Advanced to open the Packet Filter Rule-Advanced dialog box.
6. Use Table 12 for determining which option you want.
7. Click OK to return to the Policy Manager for Packet Filtering.
8. Click Save to save your work.
Marking packets for differentiated services (QoS)
If your network is running Differentiated Services, a VSU can be configured to mark specific IP
packets for specific types of services.
Table 12: Packet Filter rule-advanced options
Option Description
Permit all non VPN traffic Select this button to permit all non VPN packets.
Deny all IP non VPN traffic Select this button to block all IP non VPN packets.
Deny all non VPN traffic Select this button to block all non VPN packets.
Drop all IP fragments Select this check box to block all IP packets that
have been fragmented. See Path MTU
Discovery on page 201 for information about
packet fragmentation.
Drop all Short IP Packets Select this check box to block all IP packets that
are unusually small. The following are considered
short packets.
IP packets shorter than 20 bytes.
TCP packets shorter than 40 bytes.
UDP packets shorter than 28 bytes.
ICMP packets shorter than 28 bytes.
Keep Filter Statistics Select this check box if you want to send the
“packet filtering log” to a common SNMP
manager. The manager that is used is configured
in the Routing.