Monitoring your network
274 Avaya VPNmanager Configuration Guide Release 3.7
Firewall State Shows information about each firewall rule
configured in the security gateway.
Firewall
Timers Shows firewall timer information for the various IP
protocols.
Process
Tab le Shows information about all user processes that
are currently running in the security gateway.
Protocol Stats Shows information about the network traffic that
the security gateway handles. Information is
presented according to the type of protocol.
Route Stats Shows network routing table statistics.
System Stats Shows statistics regarding system resources.
System State Shows a snapshot of all system resources.
Security
Processor
Stati sti cs
Shows the statistics for the Hifn chip. These
statistics are only applicable for SG200, SG203,
and SG208.
Flush
Configuration Deletes existing firewall, VPN, QoS, failover,
SNMP, DNS relay , NAT, V oIP, remote access, and
static routes configuration on the security
gateway. The settings are returned to the factory
defaults.
Caution!
Use this operation only as a last resort to recover
lost administrator connectivity with the security
gateway.
Reset
Configuration
to Factory
Defaults
Deletes all existing configuration except the
license. All configuration parameters are returned
to the factory default configuration except for the
license parameters. Unless the security gateway
device is in an inconsistent state (that is, if the
configd process in not running) the license
parameter is also returned to the factory default
setting.
Caution!
Use this operation only as a last resort to recover
lost administrator connectivity with the security
gateway.
Table 30: Diagnostic Reports
Report Type Description
2 of 2