Device management
282 Avaya VPNmanager Configuration Guide Release 3.7

To import configuration data for a device:

1. Select “Devices” on the Configuration window in VPNmanager.
2. Select the device from which configuration data will be imported. (If the device entry does
not yet exist in VPNmanager, simply create a new device, specifying its IP address and
selecting “Set Up Later” in the Device Setup Wizard.)
3. Select the device Actions tab.
4. Click the Import Configuration button.
Ethernet Speed
The Ethernet Speed button only appears when a VSU10000 is the selected device.
Ethernet Speed button allows the VPNmanager to configure the Ethernet speed on a per port
basis.
When the Ethernet Speed button is selected, there is a short delay in presenting the Ethernet
Speed dialog box. This delay is due to VPNmanager trying to contact the security gateway to
retrieve the current port speed settings. When the VPNmanager has retrieved the current spe ed
settings, the Ethernet Speed dialog box displays the public p o rt settings by default. The current
private port settings are displayed at the top of the Ethernet Speed dialog box.
Port. - Select the public or private port to configure the port speed of the selected security
gateway.
Set Speed. - Configure the Ethernet speed by selecting one of the following speed options:
Note:
Note: When selecting the port speed, be sure to select a speed that is supported by t he
host PC. If the host PC does not support the selected speed, the VPNmanager
looses connectivity to the security gateway.
Auto Negotiate. - Auto negotiation allows the security gateway’s Ethernet port and host PC to
automatically select the correct port speed and duplex mode to be used between the two ports.
1000 Mbps, Full Duplex. - This option allows the VPNmanager to configure the security
gateway’s Ethernet port speed to 1000 Mbps in full duplex mode. In full duplex mode, the
Ethernet port is capable of sending and receiving packets simultaneously over the network at
1000 Mbps.
1000 Mbps, Half Duplex. - This option allows the VPNmanager to configure the security
gateway’s Ethernet port speed to 1000 Mbps in half duplex mode. In half duplex mode, the
Ethernet port is capable of either sending or receiving packets over the network at 1000 Mbps.