DSS Key Functions | Page 24 |
|
|
DSS Key Functions
Overview
You can program many of the phone’s functions to a DSS key. You can also program dialing digits or user, group and park slot numbers.
•4406D+, 4606D+ and TransTalk® MDW 9040 Telephone:
The DSS keys on the 4406D+, 4606D+ and TransTalk® MDW 9040 can only be programmed through the Manager Application. Contact your System Administrator.
•4450 DSS module:
The buttons of the 4450 DSS module are programmed via the station to which the 4450 is connected. A user can program a button on the 4450 in the same manner that they would a button on their phone. In the following sections, the “DSS key” can either be a button on the actual station, or a button on the 4450 DSS module.
Storing Abbreviated Dialing Under a DSS Key
Each button can be programmed with the number that you would normally dial. Typically you would use this for an external number or a system or personal short code, consult your System Administrator for a list of shortcodes.
To store digits under a DSS key
1.Press Menu 
.
2.Using the 
and 
keys, display and then select Prog.
3.Press the required DSS key.
4.Enter the number to store. Note: You can store partial strings as after pressing the DSS key you can dial further digits, e.g. you could store an international dial prefix for all calls to a particular country.
5.Select Done.
6.Select another DSS key or press Exit 
.
or
1.Press Menu 
.
2.Using the 
and 
keys, display and then select Admin
3.Use the 
and 
keys to select AD.
4.Enter the number to store. Note: You can store partial strings as after pressing the DSS key you can dial further digits, e.g. you could store an international dial prefix for all calls to a particular country.
5.Press the required DSS key.
6.Select Done.
7.Select another DSS key or press Exit 
.
4400, 4600, 6400 & TransTalk MDW 9040 Telephones | Page 24 | |
IP Office | 40DHB0002USAL - Issue 7 (2nd October 2003) | |
