DSS Key Functions | Page 27 |
|
|
Admin Functions
The following can be programmed against a DSS key via the Admin function (see "Programming Functions Against DSS Keys" on page 26).
Dir
Access the telephone system directory (see "Using the Directory" on page 7). This function does not require any data entered when programmed.
Drop
Clears the current connected call. Temporarily pauses the ringing of an incoming call. This function does not require any data entered when programmed.
Hfans
Sets the phone to
Timer
Starts a timer running on the phone's display. This function does not require any data entered when programmed. The timer is reset whenever a new call is made or answered. When timer mode is selected the appropriate DSS key lamp is lit.
AutoCB
Sets a callback when free on a called busy extension and a callback when next used on a called but unanswered extension. This function does not require any data entered when programmed. When a callback is set the appropriate DSS key lamp is lit. The DSS key can be pressed again to cancel the callback.
Prog
Program and relabel the default softkey functions. Program a telephone number to dial against a DSS key (see "Storing Abbreviated Dialing Under a DSS Key" on page 24).
CFrwd
Switch call forwarding on/off and set the forwarding number. This function can be programmed with or without a target forwarding number.
If programmed with a forwarding number, pressing the appropriate DSS key switches forwarding to that number on.
If programmed without a forwarding number, pressing the appropriate DSS key prompts the user to set a forwarding number and then switch call forwarding to that number on.
In both cases, while call forwarding in on the appropriate DSS key lamp is lit and pressing the DSS key again switches call forwarding off.
4400, 4600, 6400 & TransTalk MDW 9040 Telephones | Page 27 | |
IP Office | 40DHB0002USAL - Issue 7 (2nd October 2003) | |
