DSS Key Functions | Page 25 |
|
|
Storing User, Park Slot and Queue Numbers
The following functions provide both number storage plus additional functions and DSS key lamp usage.
To store user, park slot and queue numbers under a DSS key:.
1.Press Menu 
twice.
2.Press 
and select ProgA.
3.Press 
and select DSS.
4.The options shown are Park, User, Group and Dial.
•Park:
Monitor a call park slot by entering the slot number (the extension number followed by a single digit). When a call is parked in that slot the DSS key flashes. If you press the key you have options to Drop or Answr the call.
•User:
Monitor another extension. If the extension is ringing the lamp flashes and when you press the DSS key you can see details of the caller and have a DPkUp option to answer the call yourself. When the lamp is on the extension is busy and pressing the DSS key display information about any call in progress.
•Group:
Monitor the status of a hunt group queue. Flashes green is a call is incoming to the group. Flashes red if the group has queued calls. Press the key to show call information, press the key again to pickup a call.
•Dial:
This is similar storing a general number but the DSS lamp remains lit until the call is disconnected.
•Flash:
Send a hook flash signal to the current connected line.
5.Enter the number to store under the key (the park slot, user, group or dial number). Use the
6.Press the DSS key under which you want to store the function.
•If the DSS key is already set you will see options to Replace, Keep or Delete the existing function. Select the option required.
7.When BUTTON PROGRAMMED is shown select Cont.
8.Press Exit 
.
4400, 4600, 6400 & TransTalk MDW 9040 Telephones | Page 25 | |
IP Office | 40DHB0002USAL - Issue 7 (2nd October 2003) | |
