Axis Communications 700 user manual Where x.xx is the software version number

OlXg D77 User’s Manual Section 2: Basic Installation 17

During the self test, this message will appear on the display:

$;,6￿￿￿￿

9HUVLRQ￿￿[￿[[

where x.xx is the software version number.

e nv e

To establish communication with the TCP/IP environment, you must assign an IP address and optionally make up a unique host name for your AXIS 700. The IP address can be set from the AXIS 700 control panel, or using any of the conventional methods: DHCP, ARP, RARP or BOOTP. Choose your preferred method.

On Windows NT networks, DHCP is the recommended method since it allows a number of parameters to be set automatically, provided the DHCP server has been configured to do so.

On Macintosh networks, you can use DHCP or the control panel.

Refer to “Other Methods for Downloading the IP Address” on page 20 for more information on the DHCP, ARP, RARP and BOOTP methods.

R du	To set the IP address from the control panel, follow these steps:
	1.	Acquire an unused IP address from your Network Administrator.
	2.	Power up the AXIS 700. Press Menu	when this display appears:

$;,6￿￿￿￿

9HUVLRQ￿￿[￿[[

3.After a few seconds this display will be shown:

,3￿DGGUHVV￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿