2 | AXIS 700 User’s Manual |
|
|
Safety Notices - Please observe all safety markings and instructions when using this product.
Caution! - potential hazard that can damage the product.
Important - potential hazard that can seriously impair operation.
Do not proceed any of the above notices until you have fully understood the implications.
Copyright Information - The unauthorized copying of materials that are covered by copyright and other international proprietary or intellectual property rights is prohibited in most countries. Axis Communications AB recommends that the users of this equipment seek the necessary authorizations for copying material. The instructions for use in the manual shall not be considered as an inducement to make illicit duplications of material. Any duplication will be made at the user’s own risk.
Electromagnetic Compatibility (EMC) USA - This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his/her own expense will be required to take whatever measures may be required to correct the interference. Shielded cables should be used with this unit to ensure compliance with the Class A limits.
Electromagnetic Compatibility (EMC) Europe - This digital equipment fulfils the
requirements for radiated emission according to limit B of EN55022/1994, and the requirements for immunity according to
Liability - Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform us at an address which can be found in the last appendix of the manual. AXIS Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.
Year 2000 Compliance - Axis Communications warrants that the AXIS 700 is Year 2000 compliant.
Trademark Acknowledgments - Acrobat, Adobe, AIX, Avision, Bell+Howell, Canon, DOS, Ethernet, Fujitsu, Gestetner, Hewlett Packard, IBM, Infotec, Internet Explorer, Lanier, Macintosh, Microsoft, Nashuatec, Netscape, Océ, OS/2, Rex Rotary, Rioch, Salvin, Sharp, UNIX and Windows are registered trademarks of the respective holders.
Software Trademark Acknowledgments - JPEG code (libjpeg) used courtesy of the Independent JPEG Group. LDAP code (libldap and libber) used courtesy of the University of Michigan at Ann Arbor. Copyright © 1991 Regents of the University of Michigan. All rights reserved. TIFF code (libtiff) used courtesy of Sam Leffler and Silicon Graphics, Inc. Copyright ©
AXIS 700 User’s Manual | Revision 1.2 |
Part No: 16848 | Dated: September 1999 |
Copyright © Axis Communications AB, 1997 - 1999 |
|
|
|
