Axis Communications 700 user manual Au bu

OlXg D77 User’s Manual Section 2: Basic Installation 21

Pyzy vy	Make sure the AXIS 700 is powered on and attached to the network.
g d	You will need administrator privileges on the Windows NT server or
	root privileges on the UNIX system.
Ty Oxxy	Depending on the method you are using, you will need to know the
	Ethernet address of your AXIS 700. The Ethernet address is based
	upon the AXIS 700 serial number. You will find the number on the
	underside label.
Xd Oxx	Acquire an unused IP address from your Network Administrator.
q!	ο Do not use the IP address used in the examples.
au bu	If you are using host names, you can map a unique host name to the
y Xd Oxx	acquired IP address. Refer to your system manuals or to your Network
	Administrator for instructions on how to perform the name mapping
	on your particular system.
va	ο If the host name has not been included in the system host table,
	you can still perform the following instructions on how to
	download the IP address. In this case, simply replace the host
	name entry with the IP address wherever needed.