Axis Communications 700 user manual Several separate pages or stacks of papers, Setting

OlXg D77 User’s Manual Section 4: Using the AXIS 700 57

One single page or a stack of paper in the sheet feeder:

a.Press Send to scan and send the image to the destination in one step.

Several separate pages or stacks of papers:

a.Press Scan to scan each page.

b.Insert the next page and press Scan again. Repeat the procedure until all the pages have been scanned.

c.Press Send to transmit the image to the destination. During the scanning this message appears on the display:

6FDQQLQJ￿￿￿

SOHDVH￿ZDLW

7.When you have pressed Send and the transfer of the scanned image is completed, the AXIS 700 is released for other users to access.

vο By scanning multiple pages, you can accumulate several pages into one image file. See “Multipage Image Files” on page 57.

οIf no operations are performed within one minute of allocation, the AXIS 700 will return to its default settings.

οThe AXIS 700 keeps all temporary settings in memory for one minute after the last scanning job, and then returns to its default settings.

au	When scanning multiple pages, you can accumulate all the pages in
	one image file. This applies to the TIFF and PDF formats only. To
	utilize this feature, you must use a profile with the Multipage
	Documents parameter set to All pages in one file. This is the default
	setting.