Axis Communications Define 50-100 destinations within the Axis 700. The maximum, Available RAM

OlXg D77 User’s Manual Appendix E: Technical specifications 95

v		Depending on the length of the addresses, the Administrator can
l		define 50-100 destinations within the AXIS 700. The maximum
		number is limited by the EEPROM memory. If using LDAP or
		server-based address lists, the number of destinations is limited to the
		available RAM.
		Flash memory allows central and remote updating of the AXIS 700
		software over the network using FTP.
p		CPU: 32 bit RISC Controller (AXIS ETRAX)
		Flash memory: 2 Mbytes
		RAM: 2 Mbytes
		EEPROM: 8 kbytes
t k		IEEE 802.2, IEEE 802.3, SNAP and Ethernet II frame types
		simultaneously.
h
byyw		10baseT (twisted pair) and 10base2 (thin) for Ethernet
c Owwyy		SCSI cable: 50 pin high-density shielded (micro-D)
		SCSI cable: 50 pin high-density shielded to 50 pin shielded low-
		density (Centronics)
x		12V DC (36VA), via external power unit (AXIS PS-C) or
		12V DC (13,2VA), via external power unit (AXIS PS-E)
l		Height: 1.7 in (4.3 cm)
		Width: 5.9 in (14.9 cm)
		Depth: 8.8 in (22.4 cm)
		1.5 lbs (0.7 kg)
m		Temperature: 40-105°F (5-40°C)
		Humidity: 20-80% RHG, noncondensing
h
	TaR FCC Subpart B, Class A; CE EN 55022/1994, EN 50082-1/1992.
		EN 60950, UL, CSA
		3 years.
		All specifications are subject to change without prior notice.