Axis Communications 700 user manual GywRlXg D77

34 gywRlXg D77 AXIS 700 User’s Manual

•Set IP Address Automatically - Check the methods you want to use for automatically downloading the IP address at start-up. Depending on how your network has been configured, other Internet-related parameters such as the default router, subnet mask, mail server, time server etc. might also be set automatically. However, we recommend that you verify the settings when the AXIS 700 has been restarted and then enter any missing parameters manually. DHCP (Dynamic Host Configuration Protocol) allow automatic but temporary assignment of IP addresses from a central pool, BOOTP (Boot Protocol)

downloads the IP address to each device automatically. It operates on the entire network and RARP (Reverse Address Resolution Protocol) downloads the IP address to each device automatically. It operates within a single network segment only.

•IP Address - Specify the IP address of your AXIS 700, e.g. 172.19.2.254. You should acquire a unique and unused address from the Network Administrator in order to prevent conflicts with other network devices.

vο If the IP address is changed, you must re-establish the HTTP communication using the new IP address.

οIf DHCP, BOOTP or RARP is enabled, your manual settings might be overridden when you restart the AXIS 700.

οYou can also set the IP address from the AXIS 700 control panel, see the AXIS 700 User’s Guide.

•Default Router - Specify the IP address for the default router. The setting 0.0.0.0 indicates that no default router is used.

•Subnet Mask - Specify the subnet mask used for determining when the traffic should be sent via a router. The setting 0.0.0.0 indicates that automatic router sensing is used.

•Domain Name - Specify the name of the domain to which the AXIS 700 belongs. Domain refers to a set of computers on a network that have been assigned a group name.