WARNING: An open bottom stationary engine generator set must be installed over noncombustible materials and shall be located such that it prevents combustible materials from accumulating under the generator set.
Several other factors should be carefully evaluated when selecting a location for installation:
1.For effective cooling and maintenance, the system should be mounted on a flat, smooth, noncombustible level surface. A concrete pad is ideal and provides a secure installation.
2.Installation should prevent water levels from reaching the generator. Drainage must be adequate to keep concrete pad free from standing water.
3.Installation should prevent obstructions by buildup of leaves, grass, sand, snow, etc. If these items pose a problem, consider building a small fence or other break to protect the unit from accumulation of debris.
4.Installation should place the generator as close as possible to the fuel supply and transfer switch.
5.At least
6.Access must be provided to allow the enclosure covers to be opened or removed for service and maintenance.
7.Maximum Ambient temperature is 122°F (50°C).
| Figure |
|
|
Fuel Stub Up |
|
|
|
GLC125 ONLY |
|
|
|
Large Exhaust Area |
|
| B1 |
For GLC50, 60, 80, 100, 125 only |
|
| |
|
|
| B |
| Fuel Stub Up |
| Electrical |
| (All except GLC125) |
| Stub Up |
| B2 |
|
|
30 | A2 | A2 | A1 |
|
| F1 | E1 |
A | A |
|
|
Table 3-3 Mounting Dimensions
Generator | A | A1 | A2 | B | B1 | B2 | E1 | F1 |
GLC30 | 78.0 | 6.0 | 33.0 | 44.0 | 42.5 | 6.25 | 17.0 | 32.0 |
GLC35 | 78.0 | 6.0 | 33.0 | 44.0 | 42.5 | 6.25 | 17.0 | 32.0 |
GLC45 | 78.0 | 6.0 | 33.0 | 44.0 | 42.5 | 6.25 | 17.0 | 32.0 |
GLC50 | 118.0 | 6.0 | 38.0 | 44.0 | 42.5 | 6.25 | 17.0 | 32.0 |
GLC60 | 118.0 | 6.0 | 38.0 | 44.0 | 42.5 | 6.25 | 17.0 | 32.0 |
GLC80 | 118.0 | 6.0 | 38.0 | 44.0 | 42.5 | 6.25 | 17.0 | 32.0 |
GLC100 | 118.0 | 6.0 | 38.0 | 44.0 | 42.5 | 6.25 | 17.0 | 32.0 |
GLC125 | 118.0 | 6.0 | 38.0 | 44.0 | 42.5 | 6.25 | 17.0 | 32.0 |
MN2408 |
