Baldor GLC80 Generator KVA Display, Vab Displays the generators output voltage, Amps a, Amps b

Generator AC Metering The controller is in the display mode at all times except when in the programming mode. The display screens and menus may be selected by pressing the Enter or Exit keys to access Operating Status Display, Fault Display, Timer Countdown, Generator AC Metering or Programming Menus. The LCD display shows the status of the generator output:

Generator Average Output Display

Vavg Aavg Freq

000 000 000

Average Voltage	Displays the average generator voltage as follows:
	3-phase system: AVERAGE LINE TO LINE VOLTAGE--Phases
	1-phase system: LINE TO LINE VOLTAGE--Phases A to B
Average Current	Displays the average generator current as follows:
	3-phase system: AVERAGE LINE CURRENT--Phases A,B,C
	1-phase system: AVERAGE LINE CURRENT--Phases A,B
Frequency	Displays generator frequency in hertz (HZ). The frequency is displayed with a resolution of 1/10 of a hertz.

Generator KVA Display		KVA
		632.23
KVA	Displays the generator's total power output in kilo-voltamperes (KVA).

Generator Phase Voltage Display (Line to Line)

Vab	Vbc	Vca
600	600	600

Vab	Displays the generator's output voltage:
	3-phase system: LINE TO LINE VOLTAGE--Phases A to B
	1-phase system: LINE TO LINE VOLTAGE--Phases A to B
Vbc	Displays the generator's output voltage:
	3-phase system: LINE TO LINE VOLTAGE--Phases B to C
	1-phase system: LINE TO NEUTRAL VOLTAGE--Phases A-N
Vca	Displays the generator's output voltage:
	3-phase system: LINE TO LINE VOLTAGE--Phases C to A
	1-phase system: LINE TO NEUTRAL VOLTAGE--Phases B-N

Generator Phase/Neutral Voltage Display (Line to Neutral)

Van	Vbn	Vcn
347	347	347

Note:	The generator's neutral must be connected to controller terminal TB1-VN and the •neutral connected" prompt in the main
	program menu must be selected as •Yes".
Van	Displays generator voltage Phase A to Neutral.
Vbn	Displays generator voltage Phase B to Neutral.
Vcn	Displays generator voltage Phase C to Neutral.

Generator Phase Current Display

Amps a	b	c
408	451	415

Amps a	Displays generator load current as follows:
	3-phase system: PHASE A CURRENT
	1-phase system: PHASE A CURRENT
Amps b	Displays generator load current as follows:
	3-phase system: PHASE B CURRENT
	1-phase system: PHASE B CURRENT
Amps c	Displays generator load current as follows:
	3-phase system: PHASE C CURRENT
	1-phase system: not applicable

Generator Frequency/Hourmeter Display

FREQ	60.1 Hz
HOURS	56788 Hrs

FREQ	Displays generator frequency in hertz (HZ). The frequency is displayed with a resolution of 1/10 of a hertz.
HOURS	Displays unit operating hours.

MN2408 Operation 4-11