24

Windows 95/98/Me/NT4/2000

Server Based Printing – Client PC’s

Important Note

Before proceeding, please make sure that the printer driver has been installed onto your Server. For instructions on how to do this, see the appropriate section for your Server operating system.

Stage 1

1.From your PC double click on “Network Neighbourhood”; this should give you a list of the computers currently on your network.

2.Locate the icon for your server and then double click on it.

3.You should be able to see a printer icon for the DP copier.

4.Double click on the icon, Windows will then ask you if you wish to use this resource and prompt you to install the relevant files.

5.Click on “Yes” and your Server will download the appropriate files to your PC.

6.Once you have done this open your Printers folder and you should see an icon for the DP unit.

7.Do a right hand mouse click and choose “Properties”. Go to the tab “Device Options”. Here you need to input what accessories etc you have on your unit. Make sure the paper size is set to A4. For NT4 and 2000 users see the note below regarding document defaults.

8.When you have finished click “Apply” then “OK”.

30/05/02

Document Systems Support V1.0

Page 24
Image 24
Barco DP2000/2500 setup guide Windows 95/98/Me/NT4/2000 Server Based Printing Client PC’s, Stage