Chapter 3: Installation
If the marker is then dragged back above the current temperature reading, the status should return to a normal condition again. (See Figure
NOTE: If this does not happen right away, press the browser’s refresh button.
Figure 3-32. Normal status indicated.
If you want to take a sensor offline, then click on the “Sensor Currently” button. This will place the sensor offline and you won’t have to physically unplug it. See Figure 3-33.
Figure 3-33. Sensor Online/Offline screen.
Your page will look similar to Figure 3-34 after you take the sensor offline.
Figure 3-34. Sensor Offline screen.
Page 28 | ||
|
|
