Chapter 4: Notifications
Figure 4-14. Input SMTP server address.
5.Once this is entered, click “Next.”
6.Now, as with the SNMP trap, you can select how many times to attempt to resend the e-mail, and the time elapsed between each attempt.
7.Click “Next” after you fill in your parameters. (See Figure 4-15.)
Figure 4-15. Select frequency to resend e-mail attempts.
8.Now link the e-mail you just created to the temperature sensor on Port 1. Select the board the sensor is attached to, then select the sensor and click “Next.” (See Figure 4-16.)
Figure 4-16. Select sensor.
9. Select the status you want to issue the alert for and then select the action type. (See Figure 4-17.)
Page 50 | ||
|
|
