Black Box EME144A-R2, ServSensor V4E Lite manual Select the Snmp parameters

Chapter 4: Notifications

5.Select the sensor and SNMP trap parameters (see Figures 4-8 and 4-9). First, click on the board that the sensor is attached to and then select the sensor and click “Next.”

Figure 4-8. Select the sensor.

6. Select the status that you want to issue the notification for, select the action type, then click “Finish.”

Figure 4-9. Select the SNMP parameters.

EME144A-R2 724-746-5500 blackbox.com Page 47