Black Box ServSensor V4E Lite, EME144A-R2 manual Expansion Ports, Sensors tab, extended port option

Chapter 3: Installation

NOTE: As with all the other sensors, you can now set up the sound detector to be attached to a notification. Then, when your thresholds are broken, it will trigger a specified type of notification.

3.8 Expansion Ports

The ServSensor has two expansion ports that enable you to connect up to two daisychainable expansion modules. The available expansion modules are an 8-port intelligent sensor board (EME1X8) and an opto-isolated (16) dry-contact expansion module (EME1DC16). In this section, we will go through the basic setup of the 8-port intelligent sensor board. If you need information on specific functions of a particular sensor or expansion board, then please refer to the relevant manual for that product.

1.Plug the expansion board into one of the two ports located on the front panel of the unit. These are numbered E1 and E2. See Figure 3-50.

Figure 3-50. Plug expansion boards into these ports.

2. From the summary page, navigate to the “Sensors” tab. Then click “Extended port” as outlined in Figure 3-51.

Figure 3-51. Sensors tab, extended port option.

Page 40 724-746-5500 blackbox.com EME144A-R2