DCN Wireless Installation and User Instructions Central Devices
en 63
11.5External connections
11.5.1 Optical network
Connect the optical network sockets of the wireless access point to the optical network with optical network cables (refer to figure 11.5).
figure 11.5: Optical network
table 11.2: Optical network connections
Number of connections:
2x proprietary sockets Location:
Bottom side
Nodes:
1
Power consumption 4 W
11.6Configuration
11.6.1 Introduction
Use the configuration menu of the central control unit to configure the wireless access point.
11.6.2 System ID
Note
Set the correct system identity before you do the installation of the system (refer to section 12.2.2). When you change the system identity after you did the initialization, you must do the initialization again.
Set the system identity with the 4Jb System ID menu item. Adjacent systems must have different system identities (refer to figure 11.6) and different carriers (refer to figure 11.7)
