Bosch Appliances Master Arm CMD +, D1265 | Owners Manual | Part II: System Commands

D1265 Owner's Manual Part II: System Commands

Master Arm (CMD + 1)

Description

Use this function to turn on both the perimeter and interior of a single area indicated on the first line (top) of the keypad display. When you turn the system on, the display shows how many seconds of exit delay time you have to exit the protected area. You should leave before exit delay time expires.

Leaving after exit delay has expired causes the entry delay to start if the person exits through a point designated Entry/Exit door. Exiting through any other point could cause an immediate alarm. Moving into the interior of the protected area causes an alarm on an interior device. If an alarm occurs, enter your personal passcode to disarm the system.

Your cleaning service, a serviceman, or others might also use this function to turn on your system when they leave.

Using Master Arm

5.If your system is programmed to require a passcode when performing a CMD 1, the display prompts you to enter your passcode.

The passcode is shown as asterisks (*).

6.If the passcode has valid authority for this command, the display shows Exit Now! # (# = exit delay time remaining) seconds remaining.

Using the CMD+1 command only arms the area currently displayed on the top line of the keypad display. For example, if the keypad is assigned to AREA 1 WAREHOUSE, only AREA 1 WAREHOUSE arms when CMD+1 is pressed.

1.Ensure your keypad shows idle text.

2.Press the CMD button.

3.The display shows *System Command*.

4.Press the 1 button.

After the exit delay time expires, the display changes to idle armed text.

7.To disarm your security system, enter your personal passcode and press ENTER.

Bosch Security Systems, Inc. 9/10 F01U169130-02 19