Bosch Appliances D1265 owner manual Chg Skeds CMD + 5 +, Description, Using Chg SKEDS

D1265 Owner's Manual Part III: Advanced Commands

Chg Skeds (CMD + 5 + 2)

Description

A Sked is a function programmed to be performed automatically at a scheduled time by your security system. You can change the scheduled time for some functions, disable the Sked and thus prevent it from automatically happening or restart a previously disabled Sked. Contact your security representative to determine what Skeds might be programmed for your system.

To change a Sked’s time, enable a Sked, or disable a Sked, follow the procedure below to first select the Sked from a list of Skeds programmed for your system.

Using Chg SKEDS

1.Ensure your keypad shows idle disarmed text.

2.Press the CMD button. The display shows *System Command*.

3.Press the 5 button and then the 2 button.

If you prefer, you might use the function list in place of Steps 2 and 3 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the Change Skeds button, press it.

When an X appears in the Sked display, it is an indication that “Except on Holidays” is enabled.

Specific holidays are programmed by your security company.

When an * appears in the Sked display, it is an indication that the Sked has or happens today.

5.If the Sked is currently enabled, the sked is shown with Disable this sked on the second line. Press the adjacent button.

6.The display changes to show that the sked is disabled.

If the Sked is currently disabled, the display reads Skd 1 is disabled.

Press the Enable this sked button.

7.The display shows two buttons:

Only on holiday

Pressing this button enables the sked only on holidays and change the first line of the display to Skd 1 X 08:00AM without the X.

Except on holiday

Pressing this button disables the sked on holidays and change the first line of the display to Skd 1 08:00am with the X.

Consult your security company and determine which holidays have been programmed in your system.

The display changes to allow a new time to be entered.

Enter the new time using a 12-hour (HH:MM) format.

For example, if the desired time is 8:00, press 8 + 0 + 0.

Press the ENTER button.

8.If the time is a valid time, the keypad display changes to show the new time with a selection of AM or PM.

4.The number of the first Sked programmed into your system is shown, plus either its time or an indication that it is disabled.

Press the Next button to scroll through the list of Sked numbers to find the one you wish to change.

Your alarm system might be programmed with up to 40 Skeds. If the Sked number being shown is not programmed, the keypad shows Skd11 – No program.

Press the AM button to select AM.

Press the PM button to select PM.

9.The display shows the Sked with the new time. Press the Exit button to return to idle text.

44 Bosch Security Systems, Inc. 9/10 F01U169130-02