Bosch Appliances D1265 owner manual Using View Log, Using Print Log, Using Display Revision

D1265 Owner's Manual Part III: Advanced Commands

Using View Log

1.Press the View Log button.

2.The display changes to Enter start date:

Press the Go to last event button to go to the last event in the log.

Press the Exit button to exit this function and return to idle text.

3.Enter the start date in the form of mm/dd.

For example, to enter 7/14 as the start date, press 0 + 7 + 1 + 4

Once you start entering digits, the Go to last event button is replaced with the ENTER button.

Press the Exit button to exit this function and return to idle text.

4.Press the ENTER button.

6.If the date entered is valid, the first event for that date appears.

Press the Exit button to exit this function and return to idle text.

If the date entered is invalid (there are no events with that date in the log), it shows the next latest event in the log.

Press the Exit button to exit this function and return to idle text.

7.The display shows one of two ways depending on if the date entered was for an event first in the log or not.

If the date was for the first event in the log, it shows the next latest event in the log.

If the date was for an event (not the first) in the log, the display is the same except the Previous button has been added.

Press the Exit button to exit this function and return to idle text.

8.Press the Next button to go to the next event in the log.

If there are no more events in the log, *End of Log* appears.

Press the Previous button to go to the previous event in the log.

Press the Exit button to exit this function and return to idle text.

Using Print Log

1.Press the Print Log button.

2.The display changes to Enter start date:

Press the Print all events button to print all events in the log.

Press the Exit button to exit this function and return to idle text.

The events are sent to a connected printer and display changes to Printing all events in history for 3 sec before returning to idle text.

3.Enter the start date in the form of mm/dd.

For example, to enter 12/21 as the start date, press 1 + 2 + 2 + 1.

Once you start entering digits, the Print all events button is replaced with the ENTER button.

Press the ENTER button.

4.If the date entered is valid, the events for that date is sent to a connected printer and the display shows Printing events. for 3 sec, before returning to idle text.

Using Display Revision

1.Press the Display Revision button.

2.The display changes to show the revision number.

3.The display returns to idle text after 5 sec.

58 Bosch Security Systems, Inc. 9/10 F01U169130-02