Bosch Appliances D1265 owner manual Send Report CMD + 4+1 or 4+2

D1265 Owner's Manual Part III: Advanced Commands

No additional points indicates that there are no more points that can be bypassed.

If an unbypassed point is entered, an error tone will sound and a warning will be displayed.

The display returns to idle text.

7.If you are attempting to unbypass a 24-Hour or Fire Point that is still faulted, the keypad shows Cannot unbypass 24hr faulted points.

Send Report (CMD + 4+1 or 4+2)

Description

This function tests the communication link between your security system and your security company. It is an important part of maintaining a high level of security for your property.

Two types of test reports can be sent. The first type of report is a simple test report (Command 41). The second type of report is a status report (Command 42). This status report indicates the current condition of your system.

Using Send Report

1.Always call your security company before sending a test report.

2.Ensure the display shows disarmed idle text.

3.Press the CMD button. The display shows *System Command*.

4.Press the 4 button then the 1 button to send a test report.

Press the 4 button then the 2 button to send a status report.

If you prefer, you might use the function list in place of Steps 3 and 4 to initiate this function.

Press the Menu button to enter the function list.

Press the Next button repeatedly.

When you reach the Send Report button, press it.

Another menu appears allowing for the selection of sending a test report (Test Rpt) or a status report (Status Rpt).

Press either button.

5.The keypad shows Sending report… Please wait… until the report is transmitted to the security company.

34 Bosch Security Systems, Inc. 9/10 F01U169130-02